Ste firma? Registrujte sa pre lepšiu cenu.

Zostavy

(638 products)

  • Sold out

    Beech pole D50 WD-VER-VR100

    Material
    Wood Oak - CINK
    Surface finish
    Raw
    Hole
    without hole
    Sold out
    0,00 Kč
    without VAT
    0,00 Kč with VAT
    PCS
    Part of set

    Wooden handrail BEECH, D50/L3000mm WB/D50-L3000-CINK

    1 pcs
    Material
    Wood Beech - CINK
    Surface finish
    Raw
    L
    3000

    Upper anchoring - wooden pole A6/80x5-M16

    1 pcs
    Material
    Steel
    Surface finish
    Galvanized
    Post
    D50 - wood

    Round base cover A/0512-050

    1 pcs
    Material
    Stainless steel AISI 304
    Surface finish
    Satined
    Anchoring
    Top
  • New

    Sliding gate drive KEY set, max 800kg TURBO-S-800

    Mark
    Key
    Max. wing length
    7m
    Module of the gear comb
    mod 4
    Out of stock
    6.957,70 Kč
    without VAT
    8.418,82 Kč with VAT
    Backordered
    PCS
    Part of set

    Control unit for sliding gate 230V CT-102

    1 pcs
    Mark
    Key

    Receiver 4-channels - universal 433,9Mhz RX4

    1 pcs
    Mark
    Key
    Frequency (MHz)
    433
    Code type
    Multi (fix/rolling)
  • New

    Sliding gate drive KEY set, max 600kg TURBO-S-600

    Mark
    Key
    Max. wing length
    6m
    Module of the gear comb
    mod 4
    Out of stock
    6.015,20 Kč
    without VAT
    7.278,39 Kč with VAT
    Backordered
    PCS
    Part of set

    Control unit for sliding gate 230V CT-102

    1 pcs
    Mark
    Key

    Receiver 4-channels - universal 433,9Mhz RX4

    1 pcs
    Mark
    Key
    Frequency (MHz)
    433
    Code type
    Multi (fix/rolling)
  • Sold out
    New

    ROLLKIT drive for swing gate, set PERUN-2024-SMART

    Mark
    Rollkit
    Max. wing length
    2m
    Recommended weight of the wing
    100kg
    Sold out
    0,00 Kč
    without VAT
    0,00 Kč with VAT
    PCS
    Part of set

    drive left - motor for one ROLLKIT wing up to 2m/ TU-2020-L

    1 pcs
    Mark
    Rollkit
    Max. wing length
    2,5m
    Recommended weight of the wing
    100kg

    drive right - motor for one wing ROLLKIT up to 2m TU-2020-R

    1 pcs
    Mark
    Rollkit
    Max. wing length
    2,5m
    Recommended weight of the wing
    100kg

    ROLLKIT cabinet with electronics for Turn 2020 Smart CUW-24S-N

    1 pcs
    Mark
    Rollkit
    Frequency (MHz)
    433
    Wifi connection
    Yes

    Remote controller for TURN, DRIFT rolling code, 4C TR2-434

    2 pcs
    Mark
    Rollkit
    Frequency (MHz)
    433
    Code type
    Rolling
  • New

    Nice drive for a double-leaf gate TOO-3024

    Mark
    Nice
    Code type
    Rolling
    Motor power supply
    DC 24V
    7.786,80 Kč
    without VAT
    9.422,03 Kč with VAT
    Low stock (14 units)
    PCS
    Part of set
    Sets
    New

    Nice drive for a double-leaf gate, set with photocells TOO3024-ZKIT

    Mark
    Nice
    Max. wing length
    3m
    Recommended weight of the wing
    150kg
    8.717,20 Kč
    without VAT
    10.547,81 Kč with VAT
    Low stock (14 units)
    SET
    Sold out
    New

    Motor NICE - TOO up to 3m, 24V TO-3024

    2 pcs
    Mark
    Nice
    Max. wing length
    3m
    Recommended weight of the wing
    150kg

    NICE WINGO220 control unit MC424

    1 pcs
    Mark
    Nice

    Double-channel remote controller NICE FLO2R rollin INTI2

    2 pcs
    Mark
    Nice
    Frequency (MHz)
    433
    Code type
    Rolling
  • New

    Nice drive for a double-leaf gate, set with photocells TOO3024-ZKIT

    Mark
    Nice
    Max. wing length
    3m
    Recommended weight of the wing
    150kg
    8.717,20 Kč
    without VAT
    10.547,81 Kč with VAT
    Low stock (14 units)
    SET
    Part of set
    New

    Nice drive for a double-leaf gate TOO-3024

    1 pcs
    Mark
    Nice
    Code type
    Rolling
    Motor power supply
    DC 24V

    Photocell for plaster montage - do 30m EPM

    1 pcs
    Mark
    Nice
    Power supply
    12-24V AC/DC
    Protection level
    IP44
  • New

    Complete system NICE - garage doors with guide kit SPIDER32BLBDWKCE

    Mark
    Nice
    Surface of gate
    16,9 m2
    Frequency (MHz)
    433
    Out of stock
    9.203,00 Kč
    without VAT
    11.135,63 Kč with VAT
    Backordered
    SET
    Part of set
    New

    Garage drive Nice without track max 16,9 m2 SPIDER1200BLW

    1 pcs
    Mark
    Nice
    Surface of gate
    16,9 m2
    Frequency (MHz)
    433

    Belt track for SPIDO garage door opener length 3 m SR32B

    1 pcs
    Mark
    Nice
  • Fittings for sliding doors folding doors 3m GS-AL/P2000-4/N/E-set

    Material
    Aluminium
    Surface finish
    Anodized
    Glass t
    10-12
    30.250,00 Kč
    without VAT
    36.602,50 Kč with VAT
    Low stock (10 units)
    PCS
    Part of set
    New

    Aluminum profile GS-AL/P2000-4/N/E GS-AL/P2000-4

    1 pcs
    Material
    Aluminium
    Surface finish
    Anodized
    New

    Aluminum profile GS-AL/PA2000/N/E

    1 pcs
    Material
    Aluminium
    Surface finish
    Anodized
    L
    3000
    New

    Aluminum profile GS-AL/PB2000/N/E

    2 pcs
    Material
    Aluminium
    Surface finish
    Anodized
    L
    3000
    New

    Aluminum profile AL GS-AL/K2000/N/E

    2 pcs
    Material
    Aluminium
    Surface finish
    Anodized
    L
    3000
  • New

    Fittings for sliding doors folding doors 3m GS-AL/P2000-3/N/E-set

    Material
    Aluminium
    Surface finish
    Anodized
    Glass t
    10-12
    22.000,00 Kč
    without VAT
    26.620,00 Kč with VAT
    Low stock (15 units)
    PCS
    Part of set
    New

    Aluminum profile GS-AL/P2000-3/N/E GS-AL/P2000-3

    1 pcs
    Material
    Aluminium
    Surface finish
    Anodized
    New

    Aluminum profile GS-AL/PA2000/N/E

    1 pcs
    Material
    Aluminium
    Surface finish
    Anodized
    L
    3000
    New

    Aluminum profile GS-AL/PB2000/N/E

    1 pcs
    Material
    Aluminium
    Surface finish
    Anodized
    L
    3000
    New

    Aluminum profile AL GS-AL/K2000/N/E

    2 pcs
    Material
    Aluminium
    Surface finish
    Anodized
    L
    3000
  • Cantilever sliding gate set SV-136x142-ECO SV-136x142-ECO

    Material
    Steel
    Surface finish
    Galvanized
    9.119,40 Kč
    without VAT
    11.034,47 Kč with VAT
    In stock (42 units)
    SET
    Part of set

    Cantilever gate carriage Zn, profile 136x142mm H/34B-4-136x142

    2 pcs
    Material
    Steel
    Surface finish
    Galvanized
    Mark
    Umakov

    Guide wheel Zn, profile 136x142, L165mm H/14N-136x142

    1 pcs
    Material
    Steel
    Surface finish
    Galvanized
    Mark
    Umakov

    Cantilever Gate End Stop Zn, profile 136x142mm H/15P-145

    1 pcs
    Material
    Steel
    Surface finish
    Galvanized
    Mark
    Umakov

    End cap Zn, profile 136x142mm H/40-136x142P

    1 pcs
    Material
    Steel
    Surface finish
    Galvanized
    Mark
    Umakov
  • Cantilever gate set up to 8m Zn, 94x85mm SV-94x85Zn heavy

    Material
    Steel
    Surface finish
    Galvanized
    Mark
    Umakov
    16.584,40 Kč
    without VAT
    20.067,12 Kč with VAT
    In stock (73 units)
    SET
    Alternatives
    Part of set

    Cantilever gate set up to 8m Fe, 94x85mm SV-94x85 heavy

    Material
    Steel
    Surface finish
    Raw
    Mark
    Umakov
    15.198,60 Kč
    without VAT
    18.390,31 Kč with VAT
    In stock (189 units)
    SET

    Guiding track Zn, 94x85x5mm, for cantilever gate H/02-94x85-Zn-6000

    2 pcs
    Material
    Steel
    Surface finish
    Galvanized
    Mark
    Umakov
    Required products

    Double cantilever gate carriage Zn, profile 94x85m H/34B-8-94x85-HEAVY

    2 pcs
    Material
    Steel
    Surface finish
    Galvanized
    Mark
    Umakov
    Required products

    Guide wheel Zn, profile 94x85mm H/14N-94x85

    1 pcs
    Material
    Steel
    Surface finish
    Galvanized
    Mark
    Umakov

    Cantilever Gate End Stop Zn, profile 94x85, 90x95mm H/15P-100

    1 pcs
    Material
    Steel
    Surface finish
    Galvanized
    Mark
    Umakov

    End cap Zn, profile 94x85mm H/40-94x85P

    1 pcs
    Material
    Steel
    Surface finish
    Galvanized
    Mark
    Umakov
  • Cantilever sliding gate set up to 4,5m Zn, 70x70mm SV-70x70Zn clasic

    Material
    Steel
    Surface finish
    Galvanized
    Mark
    Umakov
    4.102,00 Kč
    without VAT
    4.963,42 Kč with VAT
    In stock (145 units)
    SET
    Alternatives
    Part of set

    Cantilvere sliding gate set up to 4,5m, Fe, 70x70m SV-70x70 clasic

    Material
    Steel
    Surface finish
    Zn+Natural
    Mark
    Umakov
    3.521,20 Kč
    without VAT
    4.260,65 Kč with VAT
    In stock (694 units)
    SET

    Cantilever sliding gate set up to 4,5m Zn, 70x70mm SV-70x70Zn clasic-NYLON

    Material
    Steel/Nylon
    Surface finish
    Galvanized
    Mark
    Umakov
    Required products
    3.979,80 Kč
    without VAT
    4.815,56 Kč with VAT
    In stock (104 units)
    SET

    Cantilever sliding gate set up to 4,5m Fe, 70x70mm SV-70x70 clasic-NYLON

    Material
    Steel/Nylon
    Surface finish
    Zn+Natural
    Mark
    Umakov
    Required products
    3.399,00 Kč
    without VAT
    4.112,79 Kč with VAT
    In stock (176 units)
    SET

    Cantilever sliding gate set up to 4,5m Fe, 70x70mm SV-70x70BP clasic

    Material
    Steel
    Surface finish
    Zn+Natural
    Mark
    Umakov
    3.575,40 Kč
    without VAT
    4.326,23 Kč with VAT
    In stock (53 units)
    SET

    Cantilever sliding gate set up to 4,5m Zn, 70x70mm SV-70x70BP-Zn clasic

    Material
    Steel
    Surface finish
    Galvanized
    Mark
    Umakov
    4.156,20 Kč
    without VAT
    5.029,00 Kč with VAT
    In stock (53 units)
    SET

    Cantilever sliding gate set up to 5,5m Fe, 80x80mm SV-80x80 clasic

    Material
    Steel
    Surface finish
    Zn+Natural
    Mark
    Umakov
    4.237,60 Kč
    without VAT
    5.127,50 Kč with VAT
    In stock (937 units)
    SET

    Cantilever gate set up 5,5m Zn, 78x78mm SV-80x80Zn clasic

    Material
    Steel
    Surface finish
    Galvanized
    Mark
    Umakov
    4.855,70 Kč
    without VAT
    5.875,40 Kč with VAT
    In stock (535 units)
    SET

    Guiding track Zn, 70x70x4mm, for cantilever gate H/02-70x70-Zn-6000

    1 pcs
    Material
    Steel
    Surface finish
    Galvanized
    Mark
    Umakov
    Required products

    SET - Cantilever Gate Carriage profile 70x70mm SV-70x70-ECO

    1 pcs
    Material
    Steel
    Surface finish
    Galvanized
    Mark
    Umakov
    Required products